Can a motorcycle starter motor be repaired?

It is possible to rebuild nearly every starter motor in use on a motorcycle or ATV, but before you start it’s best to do a little research. Checking at your local shop, you may find that a starter motor for your machine is fairly inexpensive.

How much does it cost to rebuild a motorcycle starter?

The cost of rebuilding parts for a starter might range anywhere from $50 to $350. A brand-new starter might cost anywhere between $80 to $350. You can expect to pay between $150 and over $1,100 for a qualified mechanic to replace or rebuild your starter.

Can you rebuild starter motor?

Usually, auto electric shops can rebuild or repair a starter with a bad armature, shorted field windings, bad brushes, a bad commutator, or even a bad solenoid if there is no alternative. Be prepared to wait a few days or more.

How do I fix my motorcycle starter not working?

What to Do When Your Motorcycle Won’t Start (But the Battery is Good)

1. Confirm There’s Gas in the Tank.
2. Engage the Clutch.
3. Put the Motorcycle in (the Right) Gear.
4. Look for Loose Wires.
5. Confirm the Kill Switch is Off.
6. Ensure the Fuel Valve is Set to “On”
7. See if the Fuel Injection System is Functional.

How long do motorcycle starter motors last?

On average, a starter motor lasts for 100,000-150,000 miles.

How much does it cost to recondition a starter motor?

Based on Fixter’s repairs and replacement figures, the starter motor replacement cost (UK) ranges between £228 and £498. The average cost of a starter motor replacement balances out in the UK at £290.

How do you start a motorcycle without a starter motor?

If You Can’t Pop-Start Your Bike, Here Are Some Steps to ‘Thump-Start’ it!

1. Engage your center-stand.
2. Again, position your motorcycle in a clear path and make sure all systems are ready to run.
3. Shift into 4th gear.
4. Turn the rear wheel with force.
5. Once the motorcycle is running, quickly shift down to neutral.

Can you push start a motorcycle with a bad starter?

Push-starting a motorcycle just eliminates the need to use the starting system. Be sure, then, that your battery or starter is at fault. Pop-startin’ won’t help if you have a bum clutch safety switch, no gas, or a faulty coil.

How do you test a bad starter on a motorcycle?

Symptoms of a bad motorcycle starter may include the motorcycle not being able to start at all, the motorcycle only starting intermittently, hearing the starter running even when the engine has already started, and being able to hear a strange clicking sound from the starter.

Can you start a motorcycle without a starter?

With a little bit of gumption and some boots to the rubber, a motorcycle can start even without a starter! Two main techniques are going to come in handy to be able to go over the starter’s head and get that engine firing, pop starting (also called push-starting or clutch starting) and thump starting.

Are Rebuilt starters any good?

Although a properly remanufactured starter may be just as good as a new one from the standpoint of quality, remanufactured units do in fact have one major drawback. When you buy a remanufactured unit, you typically have to provide the remanufacturer with the old starter.

How many times can you tap your starter?

If the starter is dead but the windshield wipers and headlights are working, the problem could be a stuck gear. The starter cannot function properly if that happens. Give the starter a tap about 4 to 5 times with a tool such as a hammer or a wrench.