Miscellaneous

How do I calculate how much water is in my above ground pool?

Contents

How do I calculate how much water is in my above ground pool?

Length x width x depth x 7.5 = volume (in gallons) Multiplying that by the depth gives the volume in cubic feet. Since there are 7.5 gallons in each cubic foot, multiply the cubic feet of the pool by 7.5 to arrive at the volume of the pool, expressed in gallons.

How many gallons is my above ground pool?

Length x width x depth x 7.5 = volume (in gallons) Length times width gives the surface area of the pool. Multiplying that by the depth gives the volume in cubic meters. If you’d like to find the pool volume in gallons, multiply your results by 7.5, as there are 7.5 gallons for each cubic foot.

How much water is in a 15 by 30 above ground pool?

If you are lucky enough to have an Above Ground Pool, or some Inground Pools where the entire bottom is one Depth, it is very easy to figure out the Average Depth. It is just the Depth of the water….How Many Gallons Of Water Are In My Swimming Pool?

SIZE GALLONS OF WATER
33′ Round 25,700
15′ x 30′ Oval 10,620

How many gallons of water in a 27 foot round pool 52 inches deep?

How many gallons is a 27 foot by 52 inch pool? There are approximately 1,870 gallons of water in a 27-foot-round, 52-in-high swimming pool. To find the answer, use the formula for finding the volume of a cylinder, V = pi r^2 h, then convert cubic feet to gallons. To find the radius, divide the circumference by 2 pi.

How do I calculate the surface area of my pool?

  1. FORMULAS. Surface Area (Circle): Radius x Radius x 3.14 (Radius = Diameter / 2) Surface Area (Rectangle/Square): Length x Width.
  2. EXAMPLE. A rectangular pool is 50 feet long by 20 feet wide. The shallow end is 3 feet deep and the deep end is 7 feet deep.
  3. ANSWERS. Surface Area = 1,800 square feet Volume = 81,000 Gallons.

How long does it take to fill up a 27 ft round pool?

The average pool can take 12-24 hours to fill and that is only if you have a few hoses chugging away. When your family is chomping at the bit to dive in, that may as well be an eternity. Forget this plan if you are using well water, you will burn up your pump or leave your home without water for days.

How much baking soda do I add to my pool?

A rule of thumb is 1.5 lbs. of baking soda per 10,000 gallons of water will raise alkalinity by about 10 ppm. If your pool’s pH tested below 7.2, add 3-4 pounds of baking soda. If you’re new to adding pool chemicals, start by adding only one-half or three-fourths of the recommended amount.

How much does an above ground pool cost?

On average, the cost to have an above ground pool deck professionally installed can range anywhere from $2,500 to as much as $8,000, according to the numbers we had found online. The costs really come down to the type of material being used, the size of the pool,…

How do you calculate pool water?

Multiply the pool’s length times the width times the average depth. For round pools, multiply diameter times diameter times average depth. With a rectangular pool, for example, multiply 32 x 16 x 6, which equals 3,072. This means the pool holds 3,072 cubic feet of water.

How do you calculate the volume of a swimming pool?

How to Calculate the Volume of an Oval Pool. The volume of an oval swimming pool can be found by multiplying the length in feet × the width in feet × 3.14 ÷ 4 × average depth in feet × 7.48. The first part of this formula(length × width × 3.14 ÷ 4) determines the area and multiplying by the depth finds the volume.

How many gallons of water are in my swimming pool?

So here are the formulas to figure out how much water is in your swimming pool: These formulas hold true for both Inground pools as well as above ground pools. Rectangular, Square or Free Form Pools: Length x Width x Average Depth x 7.5 = Total gallons. For example: 16′ x 32′ x 4.5′ x 7.5 = 17,280 Gallons.