Miscellaneous

How do I install DStv installation?

Contents

How do I install DStv installation?

Running the installation wizard on the HD decoder

  1. Press the blue “DStv button”
  2. Use the right arrow to go to “Settings”
  3. Scroll down to “Satellite Settings”
  4. Then choose “Home Network”
  5. Select “Launch Installation Wizard” then press “OK” on the remote.
  6. Choose the satellite that matches your country.

How do I install DStv decoder at home?

Connecting Explora Decoder using a Smart LNB

  1. Mount and correctly align the satellite dish.
  2. Connect the RG6 cable to the unicable port on the Smart LNB.
  3. Connect the RG6 cable to your decoder.
  4. Run the installation wizard.
  5. Contact Multichoice to activate the decoder.

How much is DStv including installation?

How Much Does DSTV Installation Cost?

Labour per hour depending on installation R400.00 – R750.00
Twin LNB R300.00 – R450.00
60 – 90m Satellite Dish R250.00 – R450.00
10m cable Included

What is needed for DStv installation?

DStv Explora Installation Voucher DStv Smart LNB. Up to 25m cable. Connection of the DStv Explora to one TV. Connection of your DStv service.

How long does DSTV installation take?

If the installation is to a single point, the DSTV installation will take up to an hour. When it comes to DSTV installation with ExtraView (Linking Up To 3 Single View HD or Xplora Decoders to one subscription) it takes about 2 hours to complete.

How do I align my DSTV satellite dish without a meter?

To align your satellite dish without a meter, visit DishPointer and enter your complete address. Then, write down the dish skew, elevation, and azimuth figures. Then, on your remote, press [MENU] and select Settings and Help > View Signal Strength.

Can I use my DStv decoder at another house?

In short yes and no, Yes you can use your DSTV Decoder at another house. Your Decoder is paired with your smartcard, so in order for the decoder to work, all you need to do is you carry your main decoder with the linked smartcard.

Can I trade in my DStv decoder?

You will keep accessing DStv for as long as your older Single View decoder is still working. You can, however, trade-in your active Single View decoder at any of our service centres or agencies for a brand new DStv HD Decoder for only R349.

Can I exchange my old DSTV decoder?

Are DStv installers working during lockdown?

DStv is considered an essential service which means our Call Centres and Walk-in Centres, and accredited installers will be here for you during lockdown to ensure you remain watching. We have put precautionary measures in place to protect our staff to minimize contact and travel risks.

How to install your own DStv dish yourself?

How to install a DSTV dish yourself 1 Step one – Mount the dish properly. When you receive your DSTV dish, you will notice that it comes with four cement screws. 2 Step two – Align the DSTC dish correctly. Make use of a sat meter to point the dish in the correct direction. 3 Step three – Ensure stability and enjoy.

Do you have to pay for DStv installer?

Please confirm requirements with your installer before the installation. Unless you got a trade-in with two decoders that includes installation, your installation excludes costs for work such as connecting the decoder to more than 1 TV or linking it to other decoders.

How long does it take to install a DStv link?

Installation time ( about 10-20 minutes) Q1- What is a dstv link and what benefits does it have over blasters? A1- DSTV tv link is a device that connects to the RF out port via a coaxial cable.

Is there a DStv installation in Pretoria South Africa?

ABOUT DSTV INSTALLATION IN PRETORIA. DStv Installation In Pretoria was founded in 2014 when we started off operating in small parts of Johannesburg. In the last 6 years, we have grown almost exponentially and are now covering multiple areas in Gauteng.