Popular lifehacks

How do I reset my Lexmark maintenance kit?

by Editor

Contents

How do I reset my Lexmark maintenance kit?

Resetting the Roller Kit counter

  1. Turn off the printer.
  2. Enter the Configuration Menu. Press and hold the 2 and 6 buttons simultaneously.
  3. Select Reset Roller Kit Counter from the Configuration Menu.
  4. From the options displayed, select the roller kit to reset.
  5. Select Yes to reset the roller kit counter value.

How do I reset my Lexmark printer password?

Please contact Lexmark Technical Support for additional assistance….Solution.

Step Action
1 Power the MFP off.
2 Press and hold the OK button on the printer control panel.
3 Power the MFP on, and keep the OK button held down until you see Ready on the display. The password is now reset to the default of 00000.

How do I reset my Lexmark printer without a password?

  1. Power the printer off completely.
  2. While the power is off, simultaneously hold down the Menu>, Go, and Select buttons.
  3. While still holding down the buttons, power the printer back on. Release the buttons when Restoring Factory Defaults appears on the display.
  4. Allow the printer to warm up as normal.

How do you reset the maintenance kit on a Lexmark cs410dn?

To clear the maintenance message and reset the count, follow these steps:

  1. As you power the printer on, press and hold the SELECT and the RETURN buttons.
  2. Hold the buttons for six to eight seconds after turning on the power, then release them.
  3. Now, press the right Menu arrow until you see RESET MAINT CNT.
  4. Select this.

How do I unlock my Lexmark printer?

Hold the ‘Go’ and ‘Stop’ buttons while powering on the printer, which will lock or unlock the control panel.

Why is my Lexmark printer not printing?

One of the most common Lexmark printer issues is that the printer is not responding to print requests. Restart your printer. In some cases, a simple restart can fix the issue. Unplug the printer and check if there is any paper stuck in the machine, and if the toner is installed correctly.

What is the maintenance kit on a Lexmark?

The Maintenance Kit is composed of four parts; fuser, transfer roller, picks roller assembly and separator roller assembly. This document outlines the proper replacement procedure for each of the parts.

How do you reset the maintenance light on a Lexmark cs510de?

diag mode : hold key 3 and 6 and power on machine. keep holding for about 15 sec and then release. To reset the fuser count:1 Select Printer Setup from Diag Menu, and press Select. 2 Select Reset Fuser Cnt, and press Select.