How do you assemble a skateboard step by step?

Let’s put it together.

1. Step 1: Grip the deck. Peel the paper backing off the grip tape.
2. Step 2: Mount the trucks on the deck. Once you have the holes poked, insert the hardware bolts into the deck from the griptape side.
3. Step 3: Put your wheels on. First you’ll need to put the bearings in the wheels.
4. Step 4: Fine tuning.

Do skateboards trucks need spacers?

Bearing spacers are totally optional; longboarders and casual skaters likely won’t put enough pressure on their boards to ever need them, though they are definitely a good investment if you want to slide, do a lot of tricks, and generally skate hard. Unlike bearings, bearing spacers are not one-size-fits-all.

Is it hard to assemble a skateboard?

Assembling your skateboard isn’t difficult once you understand how all the parts work together. Start by applying the grip tape to the deck, then screw in your trucks, and finally add the wheels and bearings.

What tools do you need to put a skateboard together?

Tools you need: A skate tool or a 1/2″ socket/wrench, an Alan wrench or Philips screwdriver. Hold the nut one side and on using a screwdriver or Allen wrench (depending on the type of bolts) to lock the bolt on the other side. Use your thumb and index finger and screw the bolts using your fingers.

How do you remove everything from a skateboard?

To take off the truck, you’ll have to remove all the bolts that attach it to your board. You can use pliers for this, or when using your skateboard tool, use the smallest socket. Place it on any of the nuts of your skateboard truck, then put the screwdriver to the screw inside that nut.

How much do skateboard wheels cost?

How much should skateboard wheels cost? Skateboard wheels can vary significantly in price, but most professional and high quality wheels will be between $20 to $50.

Do Pro skaters use spacers?

How much does it cost to assemble a skateboard?

On average, it will cost $120 to $150 to build a professional-grade skateboard. Of course, you can really start increasing those prices by buying the best of the best of each skateboard component. That being said, some bearings can cost as much as a few hundred dollars. But we won’t even get into that.

How do you put a truck on a skateboard?

It is now time for mounting the trucks to your deck. The deck will have 4 mounting holes present on each side. You need to punch through them using the screwdriver and insert 4 screws on each side. Now turn the deck upside down and slip the truck through the screws and the base-plant and affix them tightly using nuts and the wrench.

What’s the best way to assemble a skateboard?

Hold a razor at 45 degrees, make a small incision, and trim the excess grip tape, following the outline of the deck. Sand down the edges of the grip tape to smooth any rough or lifted portions that could peel up.

How do you attach kingpins to skateboards?

Hold the hardware in place while you attach one truck at a time. Make sure your two trucks are facing each other—IE, both kingpins are facing in. Fasten the nuts over the trucks using your skate tool or socket wrench. Use a skate tool to tighten the heads of the bolts in an “X” pattern. Repeat on the other side.

How do you install skateboards on a deck?

Place bolts through the holes in the deck. If you’re installing risers, start by fitting those onto the bolts. If not, slip the baseplate onto the bolts. Hold the hardware in place while you attach one truck at a time. Make sure your two trucks are facing each other—IE, both kingpins are facing in.