How do you fix automatic locking hubs?

If the hub fails to lock, the hub will have to be disassembled and inspected or replaced. To check release, hold the axle shaft steady and rotate the wheel backwards. You should hear a click as the locking mechanism slides back out and disengages the hub. Rotate the wheel forward again and it should turn freely.

How do Ford auto locking hubs work?

The locking mechanism inside an automatic locking hub is sort of like a one-way clutch. When torque is applied by the driveshaft, it forces the hub to slide in and lock. The hub then remains in the locked position as long as the transfer case remains in four-wheel drive.

What does auto mean on locking hubs?

In auto the hubs are not locked, driveline does not turn till you flip switch then hubs go in and the transfer case motor locks in.

Why does Ford use locking hubs?

The only reason the new fords have locking hubs is it takes 3/4 of a revelotion for the 4×4 to engage so if your stuck already and your front tires wont turn you can manually lock the hub so it does not need that 3/4 revolution to engage. Otherwise the manual locking hub is not used.

Is it bad to keep your hubs locked?

Leaving your hubs locked will cause no damage to your vehicle and will not influence it’s handling. By the way, locking hubs do not create more traction. They are not to be confused with differential locks! In 2WD with locking hubs disengaged rear drive shaft, rear differential and rear axle are rotating.

What does a bad locking hub sound like?

You may hear a grinding or slipping noise when the hub fails to properly engage. Often it is actually the good hub that starts making the noise after the other one does not kick in.

Is it bad to drive with hubs locked?

It does no harm to run around with the hubs locked and front drive disengaged for the short term. Over the longrun, though, you’ll average worse gas mileage, and have increased wear and tear on the drive train components and tires.

Can I leave my hubs locked in?

Leaving your hubs locked will cause no damage to your vehicle and will not influence it’s handling. By the way, locking hubs do not create more traction. In 2WD with locking hubs disengaged rear drive shaft, rear differential and rear axle are rotating.

Can I drive with my hubs locked in 2WD?

Leaving them locked while in 2WD will have no negative effects. I would recommend you leave your hubs locked while in 2WD during bad weather seasons. In 2WD with locking hubs disengaged rear drive shaft, rear differential and rear axle are rotating.

Can I drive with hubs locked?