What does F30 mean on a Frigidaire oven?
Contents
What does F30 mean on a Frigidaire oven?
open oven temperature sensor probe
I understand your concern with your Frigidaire range. Without knowing the model number I can’t be 100 percent certain but F30 generally implies an open oven temperature sensor probe. The oven temperature sensor probe is located inside the oven cavity in the rear upper left or rear upper right hand corner.
What does F30 mean?
The F30 is BMW’s internal model code specifically for the sixth-generation 3 Series sedan, produced between 2011 and 2019. This model code differentiates it from 3 Series vehicles from other BMW generations, like the E90, E46 and E36.
What is F30 code Kenmore oven?
The F30 indicates that the electronic oven control board detects an open oven temperature sensor probe. The F10 is similar. It indicates a runaway temperature. The F10 can be caused by high resistance in the oven temperature sensor probe circuit.
What does it mean when my oven says F31?
shorted oven temperature sensor probe
The F31 error code indicates a shorted oven temperature sensor probe or a shorted sensor circuit. The normal resistance of this probe at room temperature is about 1100 ohms. If the sensor measures less than 500 ohms, it will need to be replaced.
Is the F30 reliable?
Generally speaking, the F30 is a pretty reliable car. There are some common ‘problems,’ but most of it has more to do with high mileage wear and tear rather than a specific problem. Being a BMW, carrying out these maintenance jobs are not always cheap.
Where is the temperature sensor in my oven?
Your temperature sensor is a probe that extends into your oven on the top left corner of the back interior panel. Reach into your oven along the ceiling, toward the left back corner. You should find it there. If not, check your oven’s manual to find it’s alternate location.
Why does my GE oven says F3?
When the F3 code flashes on your GE oven, this indicates that there is a fault with the oven temperature sensor. These include the wire harness, control board or the oven temperature sensor itself.