How do I Reset my DLink DIR-615 router password?

DIR-615 Default Password Doesn’t Work?

1. Plug in the router and turn it around where all the cables are connected.
2. Use a paperclip or other small object to hold down the Reset button for 30 seconds.
3. Wait for 30 to 60 seconds while the router finishes booting up.

How do I Reset my DLink router to factory settings?

How do I reset my router to factory default settings?

1. Step 1: With the router on, insert the end of a paper clip into the pinhole highlighted below.
2. Step 2: Hold the paper clip down for 10 seconds and release.
3. Step 3: The unit will reboot automatically. Once the WLAN light stops blinking, the unit has been reset.
4. Note:

How can I Reset my DLink router password?

The router features a Reset button and you know how to reset DLink router password. Use a pointed tool, such as a paperclip or any pointy object to press the reset button. Press the Reset button for some time to reset DLink router wifi password. Release the button once you see the lights blinking.

What is the default password of D-Link WIFI?

The default user name for the D-Link DI-624 wireless router is “admin,” and the Password field should be left blank.

What is SSID in router?

The SSID (Service Set Identifier) is the name of your wireless network, also known as Network ID. This is viewable to anyone with a wireless device within reachable distance of your network. The SSID is the name of your wireless network. This is what you will look for when connecting wireless computers and devices.

How do I completely Reset my router?

To perform a hard reset:

1. With the router powered on, turn it to the side that has the Reset button.
2. With something small and pointed, like a paperclip, hold down the Reset button for 30 seconds.
3. Release the Reset button and wait 30 seconds for the router to fully reset and power back on.

How do I Reset my wifi router password?

To change your router’s password:

1. Enter your router’s IP address into your favorite web browser.
2. Log in with the default username and password (both admin, usually).
3. Go to settings.
4. Select Change Router Password or a similar option.
5. Enter the new password.
6. Save the new settings.

How to hard reset D-Link dir-615 Rev E3 / E4 router?

The D-Link DIR-615 rev E3 / E4 router has 300mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports. Hold the button pressed for 10 seconds, then release. The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done. Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.

Why does my dir-615 router not reset?

I have a DIR-615 that is not responding to hard resets. It was working fine for about a week and then stopped handing out IP’s to wireless clients. I attempted a powercycle and when the router came back up the wireless light was no longer on and it was no longer handing out IP’s to ethernet clients.

What kind of firmware is the dir-615 router?

It is hardware version A1 Firmware version 1.10. When you reset the router did you do it with the power on and hold the button down for at least 10 seconds? Also wait about 30 seconds before you try to connect to the status page after the reset. I did have the power on while attempting to reset it.

How can I Reset my di-704p DIR-655?

How hard are you pushing on the button. I have a DI-704P and I have to push fairly hard to get it to reset. It’s hard to tell if the button is actually moving when I push it. On the other hand my DIR-655 only requires a light touch to reset it.