Miscellaneous

What does SDI cord stand for?

What does SDI cord stand for?

Serial Digital Interface (SDI) is a standard for the delivery of digital video with coaxial cable. While data speeds up to 3 gigabits per second (Gbps) are possible with SDI, the most common speed is half that at 270 Mbps.

What does SDI mean in electronics?

(2) (Serial Digital Interface) SDI is a unidirectional video interface. Standardized by SMPTE in the late 1980s, SDI has been the primary interface for transmitting uncompressed digital video signals.

What is SDI hardware?

Serial digital interface (SDI) is a family of digital video interfaces first standardized by SMPTE (The Society of Motion Picture and Television Engineers) in 1989. SDI is used to connect together different pieces of equipment such as recorders, monitors, PCs and vision mixers.

What is SDI receiver?

Serial digital interface (SDI) is a standard for digital video and audio transmission over coaxial or fiber optic cabling. The SDI standard uses data words that are 8 or 10 bits in length. SDI signals are uncompressed and are self-synchronizing between the source (transmitter) and the destination (receiver).

Is SDI and BNC the same?

SDI is a transport format of the signal while BNC is a connector format. SDI utilizes coaxial cables which commonly entail the use of a BNC plug. SDI carries 16 channels of pulse-code modulation or PCM audio and uncompressed video that is digital in nature. Nevertheless, BNC connectors may come in different dimensions.

What kind of processing does a SDI receiver do?

Our SDI receivers offer integrated SMPTE video processing including descrambling, word alignment, comprehensive error detection and correction, and ancillary data extraction. Additionally, each of our SDI receivers fully supports DVB-ASI inputs.

Is the gs2970a a multi rate SDI receiver?

The GS2970A is a multi-rate SDI Receiver which includes complete SMPTE processing, as per SMPTE 425M, 292 and SMPTE 259M-C. The SMPTE processing features can be bypassed to support signals with other coding schemes. The device features an Integrated Reclocker with an internal VCO and a wide Input Jitter Tolerance (IJT) of 0.7UI.

Which is an example of a MACOM SDI product?

SDI Products. At MACOM we develop solutions which optimize the cost and performance of equipment that supports SMPTE standards. Typical applications include serial routing switchers, production switchers, master control equipment, monitors, cameras and processing equipment.

Is there a parallel bus for 3G SDI?

Parallel data outputs are provided in 20-bit or 10-bit format for 3Gb/s, HD and SD video rates, with a variety of mapping options. As such, this parallel bus can interface directly with video processor ICs, and output data can be multiplexed onto 10 bits for a low pin count interface.