Common questions

What is TP-Link admin password?

by Editor

Contents

What is TP-Link admin password?

The default IP address of TP-Link ADSL router is 192.168. 1.1. Type the username and password in the login page. The default username and password are both admin in lowercase.

How do I connect my tp-link M5350?

Open a web-browser, enter the default address 192.168. 0.1 in the address field and then press Enter. When the login window appears, enter admin (in lower case letters) for the Password, and then click the Log in button or press the Enter.

How do I reset my tp-link M5350?

Method 1: With M5350 powered on, use a pin to press the RESET hole in the interior panel for about 5 seconds. ( during you press the reset hole, you will see the router turn off and turn back on).

How can I change TP-Link admin password?

Type the username and password in the login page. The default username and password are both admin in lowercase. Click Management->Access Control->Password on left page, and type the old password and new password. Click Save/Apply to save the settings.

How do I reset my tp-link Admin password?

To reset TP-LINK router admin password

  1. Open the web browser and type the wireless router IP address in the address bar, and click.
  2. Type the username and password in the login page.
  3. Click on Manage-> Access Control-> Password on the left-hand page, and type old password and new password.

How do I find the SSID on my TP Link Router?

Login to the management page of router. Click Wireless 2.4GHz/5GHz to find the new SSID.

How do I change administrator password?

To change the admin password:

  1. Select the Settings tab > User Accounts (Under the Authorization and Authentication section).
  2. Click the admin user to view the user information for the admin account.
  3. Click the Change Password link.
  4. In the Change Password dialog, type the desired password.
  5. Click the OK button.

How do I change my WIFI admin password?

To change your router’s password:

  1. Enter your router’s IP address into your favorite web browser.
  2. Log in with the default username and password (both admin, usually).
  3. Go to settings.
  4. Select Change Router Password or a similar option.
  5. Enter the new password.
  6. Save the new settings.

How do I access my tp-link router admin without password?

If you forget it, you need to reset it. How to reset the router? Directly press and hold the reset button on the rear panel with a pin for approximately 10 seconds when the device is running. Release the reset button and wait for the device to reboot.

What is the password for the TP-Link m5350 modem?

To login with the modem TP-Link M5350 you will need to use the following default username and password: N/A/admin Others IP addresses used by the router brand TP-Link

Do you have to be connected to the TP-Link router?

It does however require you device to be connected to the TP-Link router. Note: Note: Low version of your web browser may cause compatibility problem with the web-based interface (management page) of your device, such as unable to log into the interface, display incomplete features etc.

Do you need Internet to use TP-Link web management page?

The web-based management page is a built-in internal web server that does not require internet access. It does however require you device to be connected to the TP-Link router.

How do I Reset my m5350 WiFi router?

1. Switch on your router and enable WiFi connection of your PC. 2. Click on the icon of WiFi of your PC and refresh it. 3. Select the SSID of M5350 and then click Connect. 4. Enter the wireless password you?ve noted down earlier and then click OK.

https://www.youtube.com/watch?v=61xE24MIrp0